GT06 / Concox setup
SMS commands to point a GT06-family tracker at the server.
GT06-family trackers (Concox GT06N/E, WeTrack, JM-VL01 and many clones) are configured by SMS. Insert a SIM with data, power the unit from the vehicle, then send the commands from any phone to the tracker's SIM number. The default password is 123456 on most units.
Commands
| Purpose | SMS |
|---|---|
| APN (Vodafone Egypt example) | APN,internet.vodafone.net# |
| Server and port | SERVER,1,gps.lemurseye.com,5023,0# (the 1 means "a domain name follows"; 0 is for a bare IP) |
| Reporting interval, seconds | TIMER,10,60# (10 s moving, 60 s stopped) |
| Reboot | RESET# |
| Status | STATUS# |
Replace the APN with your carrier's: Orange Egypt internet, Etisalat etisalat, WE internet.
The tracker replies to each command. If it does not, check the SIM has credit and data, and that the antenna sees the sky.
Then in the console
Register the tracker in Fleet with its IMEI (printed on the label, 15 digits) and protocol GT06 / Concox, assign it to the vehicle, and watch Live.
Ignition
Wire the ACC input to a switched 12 V line. Without it the unit reports no ignition state, and the platform falls back to movement only: it cannot count engine-on idle, so the idle cost stays at zero.